product comparison.

  Ceramicrete MAGBoard Cement Board Portland Board SIP Panel Plywood Gypsum Wallboard Gypsum Sheathing O.S.B.
Flame Spread 0 0 0 0 High Low/15 Low/10 High
Price
Setting Rapid, Adjustable n/a n/a slow n/a n/a n/a n/a n/a
Volume Change During Setting slight expansion n/a n/a slight contraction n/a n/a n/a n/a n/a
Color produced in any color n/a n/a gery, beige n/a n/a n/a n/a n/a
Smoke Developed none none none none n/a high low low high
Water Resistant yes yes no no n/a no no no no
Water Permeability almost none (0.4) n/a n/a water permeable n/a n/a n/a n/a n/a
Mold/Mildew Resistant yes yes yes no n/a no no no no
Termite Resistant yes yes yes yes n/a no yes yes no
Thermal Insulation (R-Value p/inch) 3.4 1.2 0.8 n/a n/a 1.2 0.9 1.1 1
Impact Strength high high medium high n/a high low low medium
Compressive Strength (psi) 6,000-12,000 n/a n/a 3,000-6,000 n/a n/a n/a n/a n/a
PSI 800-14,000 n/a n/a 700-900 n/a n/a n/a n/a n/a
Weight lbs/sq. ft. n/a 2.2 3.1 n/a n/a 1.6 1.9 2.4 2
Combustibility non non non non n/a burns facing facing burns
Structural yes yes no yes n/a yes no no yes
Environmental best good good ok n/a good ok ok poor
Freeze/Thaw best good good poor n/a good poor poor good
Alkalilnity neutral n/a n/a highly alkaline n/a n/a n/a n/a n/a
High Temperature Stability stable ceramic n/a n/a not stable n/a n/a n/a n/a n/a
Protection protects by intimate bond n/a n/a cathodic protection n/a n/a n/a n/a n/a
Therman Conductivity 0.28-0.54 n/a n/a 0.5-1.28 n/a n/a n/a n/a n/a
Interior Finish already finished tape & paint provide cladding n/a n/a provide cladding tape & paint tape & paint provide cladding
Exterior Finish already finished apply stucco or cladding n/a n/a n/a apply paper and stucco or cladding n/a apply stucco or cladding apply paper and stucco or cladding
Bonds to other materials chemical and physical to rock, earth materials physical bond to steal n/a n/a physical bond to steal n/a n/a n/a n/a n/a